|
|
TESTIMONIALS : Kindly, submit
your information and comments. Check back in 5-7 days to view on our web site. Thank You!!
Here's what our customers are saying...
|
I just used the green stuff on my bike, the back wheel
wasn't very
shinny. Wow now it is. I put the alluminator on it too. I use to use mothers not
anymore. Your stuff
is great. Thanks for a awesome product. Bird Shea. Email
: birdshea@att.net |
I just wanted to drop a line. I bought your polish/cleaner.
Am cleaning a 83 Yamaha XS 400, and the bike had been out side fo 2 yrs. I used your product on the rims. Boy did they come
out looking new. Dan, email: ghostridersdetailing@hotmail.com |
|
Well since I had some time to kill and I had been working on the white WS6 all weekend
I decided to show the SOM car a little attention and finish polishing the intermediate pipe (its welded to the Y-pipe so I
couldn't take it off with the rest of the cat back to polish a few weeks ago.) After doing that it made the drive shaft look
like CRAP (even more so than now!) and I figured since I had the car up what the hell I would drop the DS and polish it to
(it doesn't matter to me if anyone else ever sees it...I will know its done!) This is actually something I have been wanting
to do since BillyB posted pics of his a while back! First thing is you have to
remove the drive shaft....I used jack stands at the rear of the car and slid under and removed the four 11mm bolts holding
the universal joint caps on. The universal joints were a little stuck to the rear yoke so I used a small pry bar and pushed
the shaft forward freeing the rear universal from the rear yoke. The drop the shaft down and slide it out of the rear of the
transmission. That's all there is to getting the DS out. This is what you wind
up with, a dirty aluminum drive shaft. Mine was particularly dirty because my car had factory undercoating so it was all over
it. I had tried to clean it a few years back while on the car but that didn't do much.
The next thing I did was take a die grinder with a ball of scotchbrite pad looking
stuff and scuff and clean the shaft up really good. This makes the hand sanding go much smoother!
The next step is hand sanding. I went 320,600,800,1000,1500,2000,"fine"
sponge wet, "super fine" sponge wet, "ultra fine" sponge wet and finally 2000 wet.
Next was polishing. I have found Bling Master to be the BEST polish for this
sort of thing...PERIOD I started with Bling Master Green Stuff and a polishing ball on the die grinder, then went with Bling
Master Aluminator with a polishing bonnet on the die grinder, the Aluminator by hand with a microfiber towel, and finally
sealed it with Bling Master Barrier. I am very please with the results...AS ALWAYS! Thanks Again BlingMaster,
|
|
Well polishing my Corsa Cat Back has been on the list of
MUST DOs for a few years but I would always find a reaon to put it off (because I KNEW it would be a PIA!!!) The with the
install of my full polished (by hand...MY HAND) LLP headers and y-pipe it became even more apparent it had to be done. SOOO
I finally bit the bullet last week and got started on it...and all I can say is I am kicking my ass for putting it off this
long!!! It wasnt nearly as bad as I had thought it would be and it looks INCREDIBLE!!! The pictures dont do it any justice...the
light and dark spots are just there from the pics!!!
Thanks, BlingMaster,
Robbie Lewis
|
|
I used the BlingMaster on the rims while there and WOW, you are right that stuff is amazing. I want
to take them off and do them with the green stuff in and out then follow up with the blingmaster and see just how good they
can look. It is MUCH MUCH easier to use than the Purple Stuff and from what I can see has better results...WIN WIN!!! I left
the car in Huntsville at my girlfriends house because we have shows up that way both this weekend and next weekend, but when
it gets back I am pulling it in the shop and doing a complete thorough detail on it including the engine bay and suspension
(and of course the wheels.) I will take tons of pics and send them of all that. But AGAIN...amazing product and I am very
happy to be working with you on it! I am as impressed by it as I am Zaino...and that says ALLOT. Robbie Lewis - Leesburg, Georgia
|
|
George:
Sorry for the delay in reply - I just got the stuff. I wasn't
able to meet up with my friend until the weekend just past.
I have some pictures for you though. I'm
sure you will be able to tell the before and after pictures.
The product is great!
Thanks again for
all of your support and I am definitely recommending your product.
Jenn
|
|
I just tried the BlingMaster Green Stuff on my 18 wheeler front wheels and tanks and wow. Brought
out the luster I was looking for. Very easy to use and not much effort for a beautiful looking metal surface.
I will be ordering plenty of this to keep my metal looking good.
Thanks David for allowing me to try this product.
I have before and after pictures if you want them.
Michael Semones
Williamston, SC
|
Dear David: It was great to chat with you today, and I once again want to tell you what a great product
you have ... it has taken our already high-level detailing to another plain.
As you requested, I am sending you this reply to order a case of the 2oz bottles of the Aluminator,
and also a Headlamp Restore Kit. I also want to get 2 bottles of the Bling Barrier. (You asked that I send an email instead
of using the online ordering process on your web site). You mentioned that you wanted to add a few things for us to try, and
I appreciate your kind and generous offer. Anything you send will be thoroughly tested and trialed, and any product that meets
the performance of the Aluminator will be added to our site at ChopperDetailing.com, and will be added to the list of products
we have the companies we work with stock on their shelves. As you can see from our site we only recommend the products that
we have used, that we continue to use (on virtually every bike we touch), and that we find do an outstanding job. We have
intentionally stayed away from selling anything on the ChopperDetailing.com web site so that our recommendations are not self
serving (people buy products we recommend because they know we are a completely unbiased source for review and recommendation,
and that we do not profit from the sale of the products we recommend).
At any rate - thank you for speaking with me. Keep up the great work, and please let me know if there
is anything we can to further support your product and company. Until we speak again - take care.
Sincerely,
Scott R. Sharer
ChopperDetailing.com
UPDATE #1
David: I am out of town with my engineering work, but wanted to let you know that we tested the products you sent. Wow.
Please accept this email as an order for a case / 24-count box of the Green Stuff and for 2 dozen of the towels.
I have yet to test the Bling Barrier - - hopefully this coming weekend (I will be detailing Saturday and Sunday, with growing
demand for more). When I finished with a Harley bagger last weekend, using the Green Stuff and Aluminator to bring the aluminum
wheels back from the dead, the bike shop folks were all stunned. I also used both of these products on a Texas Chopper that
had been to the beach in Daytona (actually driven on the beach) and had not been cleaned. The entire bike was white-ish from
a complete covering of salt, and the engine looked as if it was a goner. Attached please see how far the engine was "brought
back" with your product, with only very tiny pits left that you had to get really close up to see. The attached picture shows
the left side before using your product and the right side after. The entire engine took me over 3 hours, but the owner made
it worthwhile. I actually believed that he cried a little bit out in the parking lot he was so happy that his special bike
was not ruined.
Thanks to you for everything.
Sincerely - Scott R. Sharer
UPDATE #2
David: I sent you a copy of Part 1 of the ChopperDetailing.com Newsletter "Detailing =
Safety". I thought you might like to see that your Headlight Restoration kit made it into this issue. I don't often mention
products - - only those I am really eager and interested to share with others, and that are in the top of my Detailing products
box.
Later - Scott R. Sharer
UPDATE #3
Please add to
that order of last week a 24 count of the Bling Barrier. Our detailing work
this past weekend really showed off the Bling Barrier product. We were able to take a chopper with only "fair" paint and a
modest price and turn it into a shining bike worth much more. As always - your products are the key. I will be writing another
Newsletter in a month or two and will be including some of your products as the "key" to revitalizing used motorcycles (returning
them to their original showroom finish).
I am here all this week, though out of the office on Wednesday morning until around noon. I would like
to take delivery of the products on Thursday if possible, because I think I will have detailing work on Friday over at Hilton
Head Motorsports on their "used / pre-owned motorcycle" inventory. They are ASTONISHED by what I have generated - - I worked
on a 4-year-old Harley last Friday that the GM of the operation couldn't believe. He told me that they were getting ready
to ship the bike out of there to an auction because it looked so bad they did not think they could sell it for a profit. They
now have a buyer and the potential of around $5000.00 profit from the sale because the bike looks brand new, especially the
once rusted spokes and dull paint.
Thanks again for having such a great product. We will be featuring it soon at a day of live detailing
demonstration at an event held by Renegade, a dealer for clothing and motorcycle accessories. They have asked us to some and
show the crowd how to get great results.
Thanks again - - I will talk with you soon.
Scott R. Sharer 
|
David,
This worked better than expected on my wife�s 2007 Dodge Ram. The lights were very faded but
came back nicely. So I then decided to try and see how it would work on my daughters 2000 Dodge Dakota with the same results
especially on her fog lights. Thank you again and I will recommend this product to anyone I can.
�Thank you,
|
Gary B. Foxworth
Home 813-949-1164
Cell��� 813-416-9286
|
|
|
While at the Big Daddy Garlitts show last november I encountered your product. With some anticipation I
didn't buy your wheel cleaner till just 3 weeks ago. It's truly an amazing product! My aluminum wheels look like chrome. I
tried Mother's and Busch wheel polish and they don't come close to blinging my wheels like your product does. I'll be buying
more, well worth $20 plus S & H. I'll send you a picture of my 70 Dodge Challenger as proof!
Tom M., Lenoir City Tn.
|
|
"This is the best stuff I have found for polishing the metal parts of my motorcycles. I have reccommended
it to a lot of people.
I'll try some of that other stuff you have as well".
David Borden
Dahlonega, Georgia
|
new piece of bling!!!
canton makes excellent products....i already have their coolant expansion tank and now i have their powersteering
tank...
i hand polished it for about 15 minutes to give it alittle shine. (blingmaster.com...plug for my newest sponsor)
here's
a before and after
Thanks for the products……that is some great stuff!!!!! I can’t wait to show everyone the difference.
Joey Gee, Martinsville, Ind.
The Pictures Below are of Joey Gee's Award Winning Mustang Saleen
|
|
|
|
| Chemical Cycle - a winner at The Easy Rider Competition in Sturis, SD |
hello blingmaster,
thank you for polishing my bike for michael lichters foto shooting, it was really shiny and it
was shiny when it got back home to finland. so thank you.
i we been testing your produckt with my silver produckts and
it works also there. i am gointo test it littlebit more just to be sure how it reackts with silver when time goes,, but i
think we are going to do some business...
Isto Kotavuopio, Finland
|
I have tried Bling Master Aluminator on the chrome and aluminum on my bike. It made my Harley shine and protected it
like it had a wax coating. Aluminator helped me to clean my bike with minimum effort.I have used Aluminator on all types of
metal around the house.
Tommy Pittard, Calhoun Falls S.C.
|
I was just at one of my sponsor's shop Jailhouse Choppers in Rincon GA, Harry was raving about you product.
I have to say it takes a lot to get his interest, so I figured I'd give it a shot, I must say this stuff is amazing. I'm
the oner of Martin Motorsports LLC, and the pilot of the Ballistic Eagle Jet Powered Motorcycle. I have the only
motorcycle in the world with an engine out of a target drone, which is very similar to a ballistic missle. After a couple
of years of testing we have finally got this thing haulin ass, I got 2 world records in the spring, and have been tuning this
thing up ever since. Currently I have been 198.7 mph, in 7.8 sec in the 1/4 mile. I travel up and down the
coast doing shows, and since the record things are really picking up, we have a dvd on mag rack tv called road rage, we just
shot the trailer for my documentary that we should be filming over the next year. I have also gained the support
of some local Harley Dealers, putting on shows where I melt down an import bike. in a couple of weeks I will be training to
set my body on fire as a grand finale to the show. There is a great opportunity for your company to gain exposure by advertising
with the Martin Motorsports team. we have several different sponsorship packages, that can really get your name out
there, from the simple trailer decal, team uniforms, sponsored hero cards, all the way up to wrapping the bike with your logo! check
out the bike and my story at www.ballisticeagle.com. I am very picky about whom I choose to endorse, since this project is my life dream come true. I believe in your
product, and I also believe that we can help each other and expand our businesses. I look forward to talking with you
in the near future. Kevin "Roadkill" Martin |
|
I am very happy with your metal polish. We use it on our aluminum wheels, both for the race cars and our trucks and trailers.
We have polished many wheels thru the years and we have yet to find a product that works as well and is as easy to use as
your polish. GOOD JOB!!
Alex Job
Tavares, Florida
|
"The Aluminator works great on cleaning up different kinds of jewelry. For me, it took off the scratches on my
wedding band and put a high shine on it. The shine has lasted for a long time after the polish."
Doug Chaney
Mulberry, Florida
|
|
